Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Drilling update from OSH
#1

During November, the Antelope 4 ST1 well was drilled to a total depth of 2,326 metres and wireline logging was completed. Log interpretations confirm that a thick, high quality dolomite reservoir unit continues to this southern location. Due to well integrity issues, long-term production testing could not be undertaken. Preparations to plug and abandon the well are now underway. Drilling on Antelope 6 and production testing of Antelope 5 is expected to commence shortly.

http://www.oilsearch.com/Media/docs/1512...7ce0-0.pdf

"And maybe someday we will find , that it wasn't really wasted time"
Reply

#2
I can see why IOC wouldn't consider this two bee material. It's just Ant 4 which was to complete the testing program. Let's see how this is explained away as immaterial.
Reply

#3
Nothing IOC does is material ... NEVER EVER.

Let's hope that OSH's definition of "shortly" is not the same as IOC's definition of "imminently."
If it is the same, then A-6 may not be spud (or is it spudded??) until March 2016.
Drivel Maven with Personality
Reply

#4
Actually in reading the Nov 13 presentation they have reached objectives with Ant 4:

"Well at total depth
• Primary objective: establish vertical extent of high- quality reservoir in Antelope-4
• Antelope-4 core analysis supports high-quality reservoir porosity and permeability in southern flank of field
• Well intersected top reservoir at 1,875m (6,152ft) TVDSS, 340m (1,115 feet) above field-wide gas- water contact
• Well at total depth of 2,262m (7,421ft) TVDSS - 48m (157ft) below the field gas water contact
• Wireline logging is now in progress as planned"

Just for once would be nice for IOC to report a status update, especially since Ant 4 took way longer than originally expected.
Reply

#5
Are you complaining about Ant 4 or Ant 4 ST1? Both have been reported and updated, and the problems and delays at Ant 4 discussed, at length.
Reply



Forum Jump:


Users browsing this thread: 1 Guest(s)